/****************************************************************************
**
** Copyright (C) 2020 The Qt Company Ltd
** Copyright (C) 2012 Klarälvdalens Datakonsult AB, a KDAB Group company, info@kdab.com, author Stephen Kelly <stephen.kelly@kdab.com>
** Contact: https://www.qt.io/licensing/
**
** This file is part of the documentation of the Qt Toolkit.
**
** $QT_BEGIN_LICENSE:FDL$
** Commercial License Usage
** Licensees holding valid commercial Qt licenses may use this file in
** accordance with the commercial license agreement provided with the
** Software or, alternatively, in accordance with the terms contained in
** a written agreement between you and The Qt Company. For licensing terms
** and conditions see https://www.qt.io/terms-conditions. For further
** information use the contact form at https://www.qt.io/contact-us.
**
** GNU Free Documentation License Usage
** Alternatively, this file may be used under the terms of the GNU Free
** Documentation License version 1.3 as published by the Free Software
** Foundation and appearing in the file included in the packaging of
** this file. Please review the following information to ensure
** the GNU Free Documentation License version 1.3 requirements
** will be met: https://www.gnu.org/licenses/fdl-1.3.html.
** $QT_END_LICENSE$
**
****************************************************************************/

/*!
    \page cmake-manual.html
    \target CMake Manual
    \title Build with CMake
    \brief Describes how to use CMake in your development projects.
    \nextpage Getting started with CMake

    \c{CMake} is a tool to simplify the build process for development projects across different
    platforms. \c CMake automatically generates build systems, such as Makefiles and Ninja
    files.

    \c{CMake} is a third-party tool with its own \l{CMake Documentation}{documentation}.
    This manual focuses on how to use \c{CMake} to build Qt applications and libraries.


    \section1 Table of Contents

    \list
        \li \l{Getting started with CMake}
        \list
            \li \l{Build a C++ GUI executable}
            \li \l{Further reading}
        \endlist
        \li \l{Imported targets}
        \li \l{Qt 5 and Qt 6 compatibility}
        \list
            \li \l{Versionless targets}
            \li \l{Versionless commands}
            \li \l{Supporting older Qt 5 versions}
            \li \l{Recommended practices}
        \endlist
        \li \l{CMake Variable Reference}
        \list
            \li \l{Module variables}
            \li \l{Installation variables}
            \li \l{Project variables}
        \endlist
        \li \l{CMake Property Reference}
        \list
            \li \l{cmake-properties-qtcore}{Qt6::Core}
        \endlist
        \li \l{CMake Command Reference}
        \list
            \li \l{cmake-macros-qtcore}{Qt6::Core}
            \li \l{cmake-commands-qtdbus}{Qt6::DBus}
            \li \l{cmake-macros-qtlinguisttools}{Qt6::LinguistTools}
            \li \l{cmake-commands-qtqml}{Qt6::Qml}
            \li \l{cmake-macros-qtremoteobjects}{Qt6::RemoteObjects}
            \li \l{cmake-macros-qtscxml}{Qt6::Scxml}
            \li \l{cmake-macros-qtwidgets}{Qt6::Widgets}
        \endlist
    \endlist
*/

/*!
    \page cmake-get-started.html
    \title Getting started with CMake
    \previouspage Build with CMake
    \nextpage Imported targets

    \c{CMake} is a group of tools that allow to build, test, and package
    applications. Just like Qt, it is available on all major development
    platforms. It is also supported by various IDE's, including
    \l{Qt Creator Manual}{Qt Creator}.

    In this section we will show the most basic way to use Qt in a CMake
    project. We will walk through an example project that is utilizing
    \l{Qt Widgets}.

    \section2 Build a C++ GUI executable

    A \c{CMake} project is defined by files written in the CMake language.
    The main file is called \c{CMakeLists.txt}, and is usually placed in the
    same directory as the actual program sources.

    Here is a typical \c{CMakeLists.txt} file for an application written in C++
    and using Qt and \l{Qt Widgets}:

    \quotefile snippets/cmake/helloworld_qtwidgets.cmake

    Let's go through the content.

    \quotefromfile snippets/cmake/helloworld_qtwidgets.cmake

    \printuntil cmake_minimum_required

    \c cmake_minimum_required() specifies the minimum CMake version that the
    application requires. Qt itself requires at least CMake version 3.16.
    If you use a Qt that was built statically - the default in \l{Qt for iOS} and
    \l{Qt for WebAssembly} - you need CMake 3.21.1 or newer.

    \printuntil project(

    \c project() sets a project name and the default project version. The
    \c{LANGUAGES} argument tells CMake that the program is written in C++.

    \printuntil CMAKE_CXX_STANDARD_REQUIRED

    Qt 6 requires a compiler supporting C++ version 17 or newer.
    Enforcing this by setting the \c{CMAKE_CXX_STANDARD},
    \c{CMAKE_CXX_STANDARD_REQUIRED} variables will let CMake print an error if
    the compiler is too old.

    \printuntil CMAKE_AUTOUIC

    Qt applications typically make use of the
    \l{Using the Meta-Object Compiler (moc)}{Meta-Object Compiler (moc)},
    \l{Resource Compiler (rcc)}, and \l{User Interface Compiler (uic)}
    that come with Qt. Setting the \c{CMAKE_AUTOMOC}, \c{CMAKE_AUTORCC}, and
    \c{CMAKE_AUTOUIC} variables to \c{ON} will let CMake automatically set up
    rules so that the respective compilers are called transparently, when
    required.

    \printuntil find_package(

    This tells CMake to look up Qt 6, and import the \c {Widgets} module. There
    is no point in continuing if \c{CMake} cannot locate the module, so we do
    set the \c{REQUIRED} flag to let CMake abort in this case.

    If successful, the module will set some CMake variables documented in
    \l{Module variables}. It furthermore imports the \c{Qt6::Widgets} target
    that we use below.

    For \c{find_package} to be successful, \c CMake must find the Qt
    installation. There are different ways you can tell \c CMake about Qt,
    but the most common and recommended approach is to set the CMake cache
    variable \c{CMAKE_PREFIX_PATH} to include the Qt 6 installation prefix.
    Note that \l{Qt Creator Manual}{Qt Creator} will handle this transparently
    for you.

    \printuntil )

    \c{add_executable()} tells CMake that we want to build an executable (so not
    a library) called \c{helloworld} as a target. The target should be built
    from C++ code (\c{mainwindow.cpp}, \c{main.cpp}), a \l{Qt Designer} file
    (\c{mainwindow.ui}), and a \l{The Qt Resource System}{Qt Resource System}
    file (\c{resources.qrc}).

    Note that you typically do not list header files here. This is different
    from \l{qmake}, where header files need to be explicitly listed so that
    they are processed by the
    \l{Using the Meta-Object Compiler (moc)} {Meta-Object Compiler (moc)}.

    For less trivial projects, you may want to call
    \l{qt6_add_executable}{qt_add_executable()} instead. It is a wrapper around
    the built-in \c add_executable() command, providing additional logic to
    automatically handle things like linking of Qt plugins in static Qt builds,
    platform-specific customization of library names and so on.

    \printuntil

    Finally, \c{target_link_libraries} tells CMake that the \c{helloworld}
    executable makes use of \l{Qt Widgets} by referencing the \c{Qt6::Widgets}
    target imported by the \c{find_package()} call above. This will not only add
    the right arguments to the linker, but also makes sure that the right
    include directories, compiler definitions are passed to the C++ compiler.
    The \c{PRIVATE} keyword is not strictly necessary for an executable target,
    but it is good practice to specify it. If \c{helloworld} was a library
    rather than an executable, then either \c{PRIVATE} or \c{PUBLIC} should be
    specified (\c{PUBLIC} if the library mentions anything from \c{Qt6::Widgets}
    in its headers, \c{PRIVATE} otherwise).

    \section2 Further reading

     The official \l{CMake Documentation}{CMake Documentation} is an invaluable
    source for working with CMake.

     The book \l{Professional CMake: A Practical Guide} provides a great
    introduction to the most relevant CMake features.
*/

/*!
    \page cmake-imported-targets.html
    \title Imported targets
    \brief Provides an overview of the CMake targets imported by Qt.
    \nextpage Qt 5 and Qt 6 compatibility
    \previouspage Getting started with CMake

    Each Qt module that is loaded defines a CMake library target. The target names
    start with \c{Qt6::}, followed by the module name. For example: \c{Qt6::Core}, \c{Qt6::Gui}.
    Pass the name of the library target to \c target_link_libraries to use the respective library.

    \note The targets are also available with a \c{Qt::} prefix:
    \c Qt::Core, \c Qt::Gui, and so on. See also \l{Qt 5 and Qt 6 compatibility}.

    Imported targets are created with the same configurations as when Qt was configured. That is:
    \list
        \li If Qt was configured with the \c -debug switch, an imported target with the DEBUG
            configuration is created.
        \li If Qt was configured with the \c -release switch, an imported target with the RELEASE
            configuration is created.
        \li If Qt was configured with the \c -debug-and-release switch, then imported targets are
            created with both RELEASE and DEBUG configurations.
    \endlist

    If your project has custom \c{CMake} build configurations, you have to map your custom
    configuration to either the debug or the release Qt configuration.

    \snippet snippets/cmake/examples.cmake 2
*/


/*!
    \page cmake-qt5-and-qt6-compatibility.html
    \title Qt 5 and Qt 6 compatibility
    \previouspage Imported targets
    \nextpage CMake Variable Reference

    The semantics of the CMake API in Qt 5 and Qt 6 are largely compatible. However, up to Qt 5.14,
    all imported Qt library targets and commands contained the version number as part of the name.
    This makes writing CMake code that should work with both Qt 5 and Qt 6 somewhat cumbersome.
    Qt 5.15 therefore introduced \e versionless targets and commands to enable writing CMake code
    that is largely agnostic to the different Qt versions.

    \section2 Versionless targets

    In addition to the existing imported targets, Qt 5.15 introduced \e versionless targets. That
    is, to link against \l{Qt Core} one can both reference \c Qt6::Core, or \c Qt::Core:

    \snippet snippets/cmake/qt5_qt6_compatible.cmake versionless_targets

    Above snippet first tries to find a Qt 6 installation. If that fails, it tries to find a
    Qt 5.15 package. Independent of whether Qt 6 or Qt 5 is used, we can use the imported
    \c{Qt::Core} target.

    The versionless targets are defined by default. Set \l{QT_NO_CREATE_VERSIONLESS_TARGETS}
    before the first \c{find_package()} call to disable them.

    \note The imported Qt::Core target will not feature the target properties that are available
    in the Qt6::Core target.

    \section2 Versionless commands

    Since Qt 5.15, the Qt modules also provide versionless variants of their
    \l{CMake Command Reference}{commands}. You can for instance now use \l{qt_add_translation}
    to compile translation files, independent of whether you use Qt 5 or Qt 6.

    Set \l{QT_NO_CREATE_VERSIONLESS_FUNCTIONS} before the first \c{find_package()} call to
    prevent the creation of versionless commands.

    \section2 Mixing Qt 5 and Qt 6

    There might be projects that need to load both Qt 5 and Qt 6 in one CMake context
    (though mixing Qt versions in one library or executable is not supported, so be careful there).

    In such a setup the versionless targets and commands will be implicitly referring to the first
    Qt version that was found via \c{find_package}. Set the \l{QT_DEFAULT_MAJOR_VERSION} CMake
    variable before the first \c{find_package} call to make the version explicit.

    \section2 Supporting older Qt 5 versions

    If you need to support also Qt 5 versions older than Qt 5.15, you can do so by storing the
    current version in an CMake variable:

    \snippet snippets/cmake/qt5_qt6_compatible.cmake older_qt_versions

    Here we let \c{find_package(<PackageName>...)} try to find first Qt 6, and if
    that fails Qt 5, under the name \c{QT}. If either of them is found, \c find_package will
    succeed, and the CMake variable \c{QT_VERSION_MAJOR} will be defined to either \c{5} or \c{6}.

    We then do load the package for the determined Qt version again by creating the name
    \c{Qt${QT_VERSION_MAJOR}} on the fly. This is needed because \c{CMAKE_AUTOMOC}
    expects the package name to be either \c{Qt5} or \c{Qt6}, and will print an error otherwise.

    We can use the same pattern to also specify the name of the imported library.
    Before calling \c{target_link_libraries}, CMake will resolve \c{Qt${QT_VERSION_MAJOR}::Widgets}
    to either \c{Qt5::Widgets} or \c{Qt6::Widgets}.

    \section2 Recommended practices

    Use the versionless variants of the CMake commands where possible.

    Versionless imported targets are mostly useful for projects that need to compile with both
    Qt 5 and Qt 6. Because of the missing target properties, we do not recommend using
    them by default.

    Use the versioned versions of the CMake commands and targets if you need to support Qt 5
    versions older than Qt 5.15, or if you cannot control whether your CMake code is
    loaded in a context where \l{QT_NO_CREATE_VERSIONLESS_FUNCTIONS} or
    \l{QT_NO_CREATE_VERSIONLESS_TARGETS} might be defined. In this case you can still simplify
    your code by determining the actual command or target name through a variable.

    \section2 Unicode support in Windows

    In Qt 6, the \c UNICODE and \c{_UNICODE} compiler definitions are set by default for targets that link
    against Qt modules. This is in line with the qmake behavior, but it is a change compared to
    the CMake API behavior in Qt 5.

    Call \l{qt6_disable_unicode_defines}{qt_disable_unicode_defines()} on the target to not set the definitions.

    \snippet snippets/cmake/qt5_qt6_compatible.cmake disable_unicode_defines
*/

/*!
    \page cmake-variable-reference.html
    \title CMake Variable Reference
    \brief Provides a complete reference for CMake variables implemented in Qt.
    \nextpage CMake Property Reference
    \previouspage Qt 5 and Qt 6 compatibility

    \section1 Module variables

    Qt modules loaded with \c{find_package} set various variables.

    \note You rarely need to access these variables directly. Common tasks like linking against a
    module should be done through the library targets each module defines.

    For example, \c{find_package(Qt6 COMPONENTS Widgets)}, when successful, makes the following
    variables available:

    \table
        \header
            \li Variable
            \li Description
        \row
            \li \c Qt6Widgets_COMPILE_DEFINITIONS
            \li A list of compile definitions to use when building against the library.
        \row
            \li \c Qt6Widgets_DEFINITIONS
            \li A list of definitions to use when building against the library.
        \row
            \li \c Qt6Widgets_EXECUTABLE_COMPILE_FLAGS
            \li A string of flags to use when building executables against the library.
        \row
            \li \c Qt6Widgets_FOUND
            \li A boolean that describes whether the module was found successfully.
        \row
            \li \c Qt6Widgets_INCLUDE_DIRS
            \li A list of include directories to use when building against the library.
        \row
            \li \c Qt6Widgets_LIBRARIES
            \li The name of the imported target for the module: \c Qt5::Widgets
        \row
            \li \c Qt6Widgets_PRIVATE_INCLUDE_DIRS
            \li A list of private include directories to use when building against the library
                and using private Qt API.
        \row
            \li \c Qt6Widgets_VERSION_STRING
            \li A string containing the module's version.
    \endtable

    For all packages found with \c{find_package}, equivalents of these variables are available;
    they are case-sensitive.

    \section1 Installation variables

    Additionally, there are also variables that don't relate to a particular package, but to the
    Qt installation itself.

   \table
        \header
            \li Variable
            \li Description
        \row
            \li \target QT_DEFAULT_MAJOR_VERSION
                \c QT_DEFAULT_MAJOR_VERSION
            \li An integer that controls the Qt version that \c qt_ commands forward to in case of
                mixed Qt 5 and Qt 6 projects. It needs to be set to either \c 5 or \c 6 before the
                respective \c find_package() calls.

                If set to \c 5, commands starting with \c qt_ will call their counterpart starting
                with \c qt5_. If set to \c 6, they will call their counterpart starting with
                \c qt6_.

                If not set, the first \c find_package call defines the default version.
        \row
            \li \c QT_LIBINFIX
            \li A string that holds the infix used in library names, when Qt is configured with
                \c{-libinfix}.
        \row
            \li \target QT_NO_CREATE_VERSIONLESS_FUNCTIONS
                \c QT_NO_CREATE_VERSIONLESS_FUNCTIONS
            \li Hides commands that start with \c{qt_}, leaving only the versioned
                ones starting with \c{qt6_}.
        \row
            \li \target QT_NO_CREATE_VERSIONLESS_TARGETS
                \c QT_NO_CREATE_VERSIONLESS_TARGETS
            \li Hides the imported targets starting with \c{Qt::}. Instead, you need to use the
                targets starting with \c{Qt6::}.
        \row
            \li \c QT_VISIBILITY_AVAILABLE
            \li On Unix, a boolean that describes whether Qt libraries and plugins were compiled
                with \c{-fvisibility=hidden}. This means that only selected symbols are exported.
    \endtable

    \section1 Project variables

    These variables can influence CMake commands provided by Qt. They may be set
    by the project, a toolchain file or other third-party packages.

    \section2 Qt6::Core

    \annotatedlist cmake-variables-qtcore

    \section2 Qt6::Qml

    \annotatedlist cmake-variables-qtqml
*/

/*!
    \page cmake-property-reference.html
    \title CMake Property Reference
    \brief Provides a complete reference for CMake properties implemented in Qt.
    \nextpage CMake Command Reference
    \previouspage CMake Variable Reference

    \section1 Qt6::Core
    \target cmake-properties-qtcore

    \section2 Target Properties

    \annotatedlist cmake-target-properties-qtcore
*/

/*!
    \page cmake-command-reference.html
    \title CMake Command Reference
    \brief Provides a complete reference for CMake commands implemented in Qt.
    \previouspage CMake Property Reference

    \section2 Qt6::Core
    \target cmake-macros-qtcore

    \annotatedlist cmake-macros-qtcore

    \section2 Qt6::DBus
    \target cmake-commands-qtdbus

    \annotatedlist cmake-commands-qtdbus

    \section2 Qt6::LinguistTools
    \target cmake-macros-qtlinguisttools

    \annotatedlist cmake-macros-qtlinguisttools

    \section2 Qt6::Qml
    \target cmake-commands-qtqml

    \annotatedlist cmake-commands-qtqml

    \section2 Qt6::RemoteObjects
    \target cmake-macros-qtremoteobjects

    \annotatedlist cmake-macros-qtremoteobjects

    \section2 Qt6::Scxml
    \target cmake-macros-qtscxml

    \annotatedlist cmake-macros-qtscxml

    \section2 Qt6::Widgets
    \target cmake-macros-qtwidgets

    \annotatedlist cmake-macros-qtwidgets
*/
