- Qt Creator Manual
- Creating Projects
- Qt Creator Manual 4.15.1

Managing Projects ◦ Opening Projects

# Creating Projects

Creating a project enables you to:

- Group files together
- Add custom build steps
- Include forms and resource files
- Specify settings for running applications

Setting up a new project in Qt Creator is aided by a wizard that guides you step-by-step through the project creation process. The wizards prompt you to enter the settings needed for that particular type of project and create the necessary files for you. You can add your own custom wizards to standardize the way subprojects and classes are added to a project.

Most Qt Creator project wizards enable you to choose the build system to use for building the project: qmake, CMake, or Qbs. If you are not presented with a choice, the project is set up to use qmake.

You can use wizards also to create plain C or C++ projects that use qmake, Qbs, or CMake, but do not use the Qt library.

In addition, you can import projects as generic projects that do not use qmake, Qbs, or CMake. This enables you to use Qt Creator as a code editor and to fully control the steps and commands used to build the project.

You can install tools for devices as part of Qt distributions. The kits and build and run settings for the installed device types are set up automatically. However, you might need to install and configure some additional software on the devices to be able to connect to them from the development PC.

## Selecting the Build System

Most Qt Creator project wizards enable you to choose the build system to use for building the project: qmake, CMake, or Qbs. If you are not presented with a choice, the project is set up to use qmake.

qmake is a cross-platform system for build automation that helps simplify the build process for development projects across different platforms. qmake automates the generation of build configurations so that only a few lines of information are needed to create each configuration. qmake is installed and configured when you install Qt. To use one of the other supported build systems, you need to set it up.

CMake is an alternative to qmake for automating the generation of build configurations. For more information, see Setting Up CMake.

Meson Meson is an open source build system meant to be both extremely fast, and, even more importantly, as user friendly as possible. The main design point of Meson is that every second a developer spends writing or debugging build definitions is a second wasted. So is every second spent waiting for the build system to actually start compiling code. For more information, see Setting Up Meson.

Qbs is an all-in-one build tool that generates a build graph from a high-level project description (like qmake or CMake do) and executes the commands in the low-level build graph (like make does). For more information, see Setting Up Qbs.

To change the location of the project directory, and to specify settings for building and running projects, select Tools > Options > Build & Run > General. The CMake tab contains additional settings for CMake. You can find more settings for CMake in Tools > Options > Kits > CMake and for Qbs in Tools > Options > Qbs.

To specify build and run settings for different target platforms, select Projects. For more information on the options you have, see Specifying Build Settings.

## Using Project Wizards

In the first step, you select a template for the project. You can filter templates (1) to view only those that apply to a particular target platform.

Next, you select a location for the project and specify settings for it.

When you have completed the steps, Qt Creator automatically generates the project with required headers, source files, user interface descriptions and project files, as defined by the wizard.

For example, if you choose to create a Qt Quick application, Qt Creator generates a QML file that you can modify in the Design mode.

## Selecting Project Type

You can use wizards to create following types of projects:

- Application (Qt Quick)
  - Qt Quick Application - Empty

    Create an empty Qt Quick application that uses Qt Quick 2 types.

    You can build the application and deploy it to desktop, embedded, and mobile target platforms.

  - Qt Quick Application - Scroll, Stack, or Swipe

    Create a Qt Quick application that uses Qt Quick Controls to implement a scrollable list (requires Qt 5.9 or later) or a set of pages with a stack-based or swipe-based navigation model (requires Qt 5.7 or later).

- Application (Qt)
  - Qt Widgets Application

    Use Qt Designer forms to design a Qt widget based user interface for the desktop and C++ to implement the application logic

  - Qt Console Application

    Use a single main.cpp file

- Application (Qt for Python)
  - Qt for Python Application - Empty, Window, Window (UI file), or Qt Quick Application (Empty)

    Create a Qt for Python application that contains only the main code for a QApplication or an empty window with or without a widget-based UI. Alternatively, you can create an empty Qt Quick Application.

- Application (Qt for MCU)
  - MCU Support Application

    Creates an application that uses a subset of Qt QML and Qt Quick Controls types (as supported by Qt for MCUs) that you can deploy, run, and debug on MCU boards. For more information, see Connecting MCUs.

- Libraries
  - C++ Library

    Shared or static C++ library based on qmake

  - Qt Quick 2 Extension Plugin

    C++ plugin that makes it possible to offer extensions that can be loaded dynamically into Qt Quick 2 applications by using the QQmlEngine class

  - Qt Creator Plugin
- Other Projects
  - Auto Test Project

    Projects with boilerplate code for a Qt or Google test. For more information, see Creating Tests.

  - Qt Quick UI Prototype

    Use a single QML file that contains the main view. You can review Qt Quick UI prototypes in a preview tool and you need not build them. Qt Quick UI prototypes cannot be deployed to embedded or mobile target platforms. For those platforms, create a Qt Quick application instead.

  - Qt Custom Designer Widgets

    Custom Qt Designer widget or widget collection

  - Empty qmake Project

    Empty qmake project that is based on qmake but does not use any default classes

  - Subdirs Project

    Subprojects that enable you to structure your qmake projects as a tree hierarchy

  - Code Snippet

    Creates a qmake project from a code snippet. When fixing bug reports that contain a code snippet, you can place the code snippet into a project to compile and check it.

- Non-Qt Projects
  - Plain C or C++ Application

    Plain C or C++ application that uses qmake, Qbs, or CMake but does not use the Qt library

  - Nim or Nimble Applications (experimental)

    Nim or Nimble application that uses Nimble, but does not use the Qt library

    For more information, see Setting Up Nimble.

- Import Project
  - Project from version control

    Import a project from a supported version control system. For more information on how version control systems are integrated in Qt Creator, see Using Version Control Systems

  - Import as qmake Project

    Import an existing project that does not use any of the supported build systems: qmake, Qbs, CMake, or Autotools. The wizard creates a qmake .pro file, which enables you to use Qt Creator as a code editor and as a launcher for debugging and analysis tools. However, if you want to build the project, you might need to edit the generated .pro file.

  - Import Existing Project

    Import an existing project that does not use any of the supported build systems: qmake, Qbs, CMake, or Autotools. This enables you to use Qt Creator as a code editor

To create a new project, select File > New File or Project and select the type of your project. The contents of the wizard dialogs depend on the project type and the kits that you select in the Kit Selection dialog. Follow the instructions of the wizard.

For examples of creating different types of projects, see Tutorials.

For more information about creating Qt Quick projects, see Creating Qt Quick Projects.

### Creating Widget-Based Qt for Python Applications

Qt for Python enables you to use Qt 5 API in Python applications. You can use the PySide2 module to gain access to individual Qt modules, such as Qt Core, Qt GUI, and Qt Widgets.

The Qt for Python Application wizards generate a `.pyproject` file that lists the files in the Python project and a `.py` file that contains some boilerplate code. In addition, the widget based UI wizard creates a `.ui` file that contains a Qt Designer form, and the Qt Quick Application wizard creates a `.qml` file that contains Qt Quick controls.

The `.pyproject` files are JSON-based configuration files that replace the previously used `.pyqtc` configuration files. You can still open and use `.pyqtc` files, but we recommend that you choose `.pyproject` files for new projects.

The Qt for Python - Window (UI file) wizard enables you to create a Python project that contains the source file for a class. Specify the class name, base class, and and source file for the class.

The wizard adds the imports to the source file to provide access to the QApplication, the base class you selected in the Qt Widgets module, and Qt UI tools:

     import sys
     import os

     from PySide2.QtWidgets import QApplication, QWidget
     from PySide2.QtCore import QFile
     from PySide2.QtUiTools import QUiLoader

The wizard also adds a main class with the specified name that inherits from the specified base class:

     class MyWidget(QWidget):
         def __init__(self):
             super(MyWidget, self).__init__()
             self.load_ui()
             ...

The following lines in the main class load the generated Python class from the UI file:

     def load_ui(self):
     loader = QUiLoader()
     path = os.path.join(os.path.dirname(__file__), "form.ui")
     ui_file = QFile(path)
     ui_file.open(QFile.ReadOnly)
     loader.load(ui_file, self)
     ui_file.close()

Next, the wizard adds a main function, where it creates a QApplication instance. As Qt can receive arguments from the command line, you can pass any arguments to the QApplication object. Usually, you do not need to pass any arguments, and you can use the following approach:

     if __name__ == "__main__":
         app = QApplication([])

Next, the wizard instantiates the `MainWindow` class and shows it:

     window = MyWidget()
     window.show()
     ...

Finally, the wizard calls the `app.exec_()` method to enter the Qt main loop and start executing the Qt code:

     sys.exit(app.exec_())

You can now modify the boilerplate code in the Edit mode to develop your Python application. Select REPL on the toolbar to start the Python interactive shell. To start the shell and import the current file as a module, select select REPL Import File. To also import all functions from the file, select REPL Import *.

Open the .ui file in the Design mode to create a widget-based UI in Qt Designer.

The Window wizard adds similar code to the source file, without the UI bits.

The Empty wizard adds similar code to the source file, but it does not add any classes, so you need to add and instantiate them yourself.

For more information about the Qt for Python - Qt Quick Application - Empty wizard, see Creating Qt Quick Based Python Applications.

For examples of creating Qt for Python applications, see Qt for Python Examples and Tutorials.

## Adding Files to Projects

You can use wizards also to add individual files to your projects. You can create the following types of files:

- C/C++

  C or C++ source and header files

- Qt
  - Qt item model source and header files that you can use to create classes derived from QAbstractItemModel, QAbstractTableModel, or QAbstractListModel.
  - Qt Designer forms and Qt Designer form classes, which specify parts of user interfaces in Qt widget based projects
  - Qt resource files, which allow you to store binary files in the application executable
  - QML files, which specify items in Qt Quick projects. QML File (Qt Quick 2) creates a QML file that imports Qt Quick 2.0, and Qt Quick UI File creates a UI file (.ui.qml) and the corresponding implementation file (.qml).
  - JavaScript files that you can use to write the application logic in Qt Quick projects
- Models and state charts
  - Universal Modeling Language (UML) style models with structured diagrams. However, the model editor uses a variant of UML and provides only a subset of properties for specifying the appearance of model elements. For more information, see Modeling.
  - State Chart XML (SCXML) files that contain boilerplate code for state machines. You can use the classes in the Qt SCXML module to embed state machines created from the files in Qt applications.
- GLSL

  GLSL files that define fragment and vertex shaders in both Qt Quick projects and Qt widget based projects

- General
  - Empty files
  - Scratch buffers that use temporary files. You can create this type of files for temporarily storing information that you do not intend to save
- Java

  Java class files that you can use to create Java classes.

- Python

  Python class and source files that you can use to create Python classes and scripts with UTF-8 encoding.

- Nim (experimental)
  - Nim script files.
  - Nim source files with UTF-8 encoding.

### Creating C++ Classes

The C++ Class Wizard allows you to create a C++ header and source file for a new class that you can add to a C++ project. Specify the class name, base class, and header and source files for the class.

The wizard supports namespaces. To use a namespace, enter a qualified class name in the Class name field. For example: `MyNamespace::MySubNamespace::MyClass`. The wizard suggests existing namespaces and class names as you type.

The names of the header and source file are based on the class name. To change the default suffix of a file, select Tools > Options > C++ > File Naming.

In the License template field, you can use predefined wizard variables to specify the path and filename of the license to use in the source and header files.

You can create your own project and class wizards. For more information, see Adding New Custom Wizards.

### Creating Resource Files

Qt Creator supports the Qt Resource System, which is a platform-independent mechanism for storing files in the application's executable.

The wizard creates a resource collection file (.qrc) that you can manage in the resource editor.

Select Add Files to locate and add individual files.

To list the folders and files in ascending alphabetic order in the source tree, select Sort Alphabetically in the context menu.

By default, resources are accessible in the application under the same file name as they have in the source tree, with a `:/` prefix, or by a URL with a `qrc` scheme. To specify a path prefix for all files in the `.qrc` file, select Add Prefix and enter the prefix in the Prefix field.

Some resources need to change based on the user's locale, such as translation files or icons. You can specify a locale in the Language field.

Select Remove to remove the selected file from the resource collection. In the Remove File dialog, select the Delete file permanently check box to remove the file from the file system. To remove files that cannot be found in the file system, select Remove Missing Files.

The above functions are also available in the context menu in the Projects view.

### Creating OpenGL Fragment and Vertex Shaders

Qt provides support for integration with OpenGL implementations on all platforms, which allows you to display hardware accelerated 3D graphics alongside a more conventional user interface. For more information, see Qt GUI.

You can use the QOpenGLShader class to compile OpenGL shaders written in the OpenGL Shading Language (GLSL) and in the OpenGL/ES Shading Language (GLSL/ES). QOpenGLShader and QOpenGLShaderProgram shelter you from the details of compiling and linking vertex and fragment shaders.

You can use Qt Creator code editor to write fragment and vertex shaders in GLSL or GLSL/ES. The code editor provides syntax highlighting and code completion for the files.

### Displaying Additional File Types in Projects View

Qt Creator determines whether to display files from the project folder in the Projects view depending on the file type (.pro, .pri, .cpp, .h, .qrc, and so on). To display other types of files, edit the project file. Add filenames as values of the `DISTFILES` variable. You can also use wildcards.

For example, the following code specifies that text files are displayed in the Projects view:

     DISTFILES += *.txt

This also makes the files available in the Locator.

## Adding Subprojects to Projects

In addition to Qt libraries, you can link your application to other libraries, such as system libraries or your own libraries. Further, your own libraries might link to other libraries. To be able to compile your project, you must add the libraries to your project. This also enables code completion and syntax highlighting for the libraries. The procedure of adding a library to a project depends on the build system that you use.

When you create a new project, you can add it to another project as a subproject in the Project Management dialog. However, the root project must specify that qmake uses the `subdirs` template to build the project.

To create a root project, select File > New File or Project > Other Project > Subdirs Project > Choose.

On the Summary page, select Finish & Add Subproject to create the root project and to add another project, such as a C++ library.

The wizard creates a project file (.pro) that defines a `subdirs` template and the subproject that you add as a value of the SUBDIRS variable. It also adds all the necessary files for the subproject.

To create more subprojects, right-click the project name in the Projects view to open the context menu, and select New Subproject. Follow the steps in the New Subproject wizard to create a subproject.

To add an existing project as a subproject, select Add Existing Projects in the context menu. In the file browser dialog, locate your subproject.

To remove subprojects, right-click the project name in the Projects view, and select Remove Subproject in the context menu.

To specify dependencies, use the Add Library wizard. For more information, see Adding Libraries to Projects.

## Binding Keyboard Shortcuts to Wizards

If you use a wizard regularly, you can bind a custom keyboard shortcut to it. Triggering this keyboard shortcut will directly open the wizard without the need to navigate to File > New File or Project.

Keyboard shortcuts for wizards can be set in Tools > Options > Environment > Keyboard > Wizard. All wizard actions start with Impl there.

## Related Topics

- Opening Projects
- Adding Libraries to Projects
- Adding New Custom Wizards
- Using Other Build Systems

Managing Projects ◦ Opening Projects